Back to MECHANICAL PROPERTIES OF FLUIDS

JEE PHYSICS MCQ: MECHANICAL PROPERTIES OF FLUIDS

1 Medium

1 of 1

Understanding +4 | -1

A liquid flows through a pipe of non-uniform cross-section. If

{A_1}

and

{A_2}

are the cross-sectional area of the pipe at two points, the ratio of velocities of the liquid at these points will be

View answer and explanation

Correct option: C

\frac{{{A_2}}}{{{A_1}}}

Option C (

\frac{{{A_2}}}{{{{A_1}}}}

) is correct because the ratio of velocities is inversely proportional to the ratio of cross-sectional areas according to the equation of continuity.

More Questions from MECHANICAL PROPERTIES OF FLUIDS

Practice All Chapter MCQs →

The average mass that must be lifted by a hydraulic press is

80 \mathrm{~kg}

. If the radius of the larger piston is five times that of the smaller piston, what is the minimum force that must be applied? A small drop of oil spreads over water because A film of water is formed between two straight parallel wires of length

20 \mathrm{~cm}

with separation of

0.5 \mathrm{~cm}

. The work done to increase the separation by

0.1 \mathrm{~cm}

is: The velocity of water in a river is

15 \mathrm{~m} / \mathrm{s}

near the surface. If the river is

5 \mathrm{~m}

deep, find the shearing stress between the horizontal layers of water. The coefficient of viscosity of water

=10^{-2}

poise. A liquid rises to a height of 2 cm in a capillary tube. The angle of contact between the solid and the liquid is zero. The tube is depressed more so that the top of capillary tube is only one cm above the liquid. Then the apparent angle of contact between the solid and liquid is An object weights

m_1

in a liquid of density

d_1

and that in liquid of density

d_2

m_2

. The density of th object is